[Q12-Q36] Get 100% Passing Success With True 300-610 Exam! [Sep-2021]

Get 100% Passing Success With True 300-610 Exam! [Sep-2021]

Cisco 300-610 PDF Questions - Exceptional Practice To Designing Cisco Data Center Infrastructure

NEW QUESTION 12
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)

A. delay restore
B. ip arp synchronize
C. auto-recovery
D. system priority
E. peer-gateway

Answer: A,C

Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html

NEW QUESTION 13
Refer to the exhibit.

A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?

A. Multi-Pod over MP-BGP EVPN
B. Multi-Site
C. Multi-Pod over OSPF EVPN
D. Multi-Cloud

Answer: A

NEW QUESTION 14
Drag and drop the configurations from the left onto the correct policies on the right.

Answer:

Explanation:

NEW QUESTION 15
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

A. Each uplink that connects an IOM is configured as a discrete link.
B. Cisco UCS Manager creates a single fabric port channel.
C. The port channel is disabled until an administrator enables it manually.
D. Cisco UCS Manager creates two separate fabric port channels.

Answer: D

NEW QUESTION 16
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?

A. Update the applled Fibre Channel adapter policy.
B. Enable persistent binding in the vHBA policy.
C. Include a SAN pin group in the vHBA policy.
D. Update the applled global QoS policy.

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guide_3_2_chapter_0110.pdf

NEW QUESTION 17
Drag and drop the configurations from the left onto the correct policies on the right.

Answer:

Explanation:

NEW QUESTION 18
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

A. Each uplink that connects an IOM is configured as a discrete link.
B. Cisco UCS Manager creates a single fabric port channel.
C. The port channel is disabled until an administrator enables it manually.
D. Cisco UCS Manager creates two separate fabric port channels.

Answer: D

NEW QUESTION 19
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
The device must notify its neighbors when the control plane is undergoing a restart.
The solution must suppress routing flaps in case of stateful switchovers.
Which solution must be implemented?

A. NSF
B. HSRP
C. BFD
D. ISSU

Answer: A

NEW QUESTION 20
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

A. Guest shell
B. Postman
C. NX-API
D. Bash shell

Answer: C

NEW QUESTION 21
An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?

A. YAML
B. Perl
C. Python
D. Bash

Answer: C

Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D

NEW QUESTION 22
Which two configurations allow for routing traffic between two VDCs? (Choose two.)

A. Create VRF-aware software infrastructure interfaces.
B. Cross-connect the ports between the VDCs.
C. Create a policy map in the default VDC that routes traffic between the VDCs.
D. Connect the VDCs to an external Layer 3 device.
E. Create interfaces in the VDC that can be accessed by another VDC.

Answer: C,D

NEW QUESTION 23
A database administrator experiences delay when performing storage replication between primary and secondary data centers. The data centers are located 20 kilometers apart and are connected using a 500 Mbps link. The deployment was implemented using an FCIP tunnel and a pair of Cisco MDS 9250 Series Switches. The network engineer decided to enable QoS to prioritize replication traffic. Which QoS model must be used to resolve the performance issues?

A. differentiated services
B. strict priority queuing
C. Resource Reservation Protocol
D. weighted round robin

Answer: B

NEW QUESTION 24
An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?

A. Cisco Intersight
B. Cisco Data Center Network Manager
C. Cisco Tetration
D. Cisco UCS Director

Answer: A

Explanation:
D18912E1457D5D1DDCBD40AB3BF70D5D

NEW QUESTION 25
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

A. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
B. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
C. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
D. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
E. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.

Answer: D,E

NEW QUESTION 26
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

A. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
B. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
C. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
D. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

Answer: D

Explanation:
Section: Compute Design
Explanation/Reference: https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf

NEW QUESTION 27
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

A. VSS that has unified uplinks
B. Ethernet and unified ports on the same port channel
C. cross-connections with pinning
D. vPC that has unified uplinks

Answer: D

NEW QUESTION 28
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?

A. management interface
B. interface VLAN
C. Physical interface
D. lookup

Answer: A

NEW QUESTION 29
DRAG DROP
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Select and Place:

Answer:

Explanation:

Section: Compute Design

NEW QUESTION 30
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

A. LLDP
B. UDLD
C. BFD
D. MCP

Answer: B

Explanation:
Section: Network Design

NEW QUESTION 31
Drag the appropriate from the left onto the current UDLD modes of operation on the right.

Answer:

Explanation:

NEW QUESTION 32
Which approach splits a pair of clustered fabric interconnects into two standalone devices?

A. Erase the configuration of both fabric interconnects.
B. Run the disable fips-mode command on each fabric interconnect.
C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
D. Run the connect local-management command on each fabric interconnect.

Answer: C

NEW QUESTION 33
A customer asks an engineer to develop a framework to configure Cisco services that will be used to replace process of manual device configuration. The engineer plans to use a programmatic interface and must keep these considerations in mind:
* The customer's environment requires the script to authenticate before executing further actions.
* The customer's security requirements mandate the use of HTTPS transport.
* The support stall has limited shell scripting knowledge, so the scripts should be easy to read and write and be serf-documenting.
Which two solutions should be used to meet these requirements? (Choose two.)

A. YAML
B. Python scripts
C. domain-based policies
D. REST calls
E. Bash scripts

Answer: B,D

NEW QUESTION 34
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)