[Oct 25, 2021] 300-610 Exam Dumps - Cisco Practice Test Questions

New Real 300-610 Exam Dumps Questions

Which Skills Are Covered in the Exam?

This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:

1. Network Design

• Weightage allotted – 35%

  This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.

What about Associated Certification?

Exam 300-610 is connected with Cisco’s two notable data center-specific certifications. The first one is CCNP Data Center. It is a professional-level certificate focused on endowing the candidate with in-depth data center knowledge.

The second accreditation is Cisco Certified Specialist – Data Center Design. It validates one’s expertise in building a viable and fully functional data center for Cisco. Both these certifications qualify their holders for specified job roles and hone their skills in a directional manner.

 

NEW QUESTION 71
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?

• A. Network Address Authority
• B. Extended Unique Identifier
• C. Fibre Channel ID
• D. iSCSI Qualified Name

Answer: B

 

NEW QUESTION 72
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

Answer:

Explanation:

 

NEW QUESTION 73
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?

• A. management interface
• B. lookup
• C. interface VLAN
• D. Physical interface

Answer: A

 

NEW QUESTION 74
A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure.
To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server.
Which two policies must be used to meet these requirements? (Choose two.)

• A. post error pause
• B. quiet boot
• C. CDN control
• D. front panel lockout
• E. ASPM support

Answer: B,D

 

NEW QUESTION 75
An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and BSeries servers.
Which solution should be included to meet these requirements?

• A. Pin the vNICs and vHBAs of the service profile to dedicated server ports.
• B. Pin the IOM ports of the service profile to dedicated server ports.
• C. Pin the server ports of the service profile to dedicated uplink ports.
• D. Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports.

Answer: C

 

NEW QUESTION 76
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?

• A. Cisco DAN Center
• B. Cisco ACI Multisite Orchestrator
• C. Cisco UCS Director
• D. Cisco UCS Manager

Answer: B

 

NEW QUESTION 77
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?

• A. Cisco UCS director
• B. Cisco intersight
• C. Cisco tetration
• D. Cisco data center network manager

Answer: B

 

NEW QUESTION 78
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

• A. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
• B. A separate DSCP value must be configured for all FCIP VSAN traffic.
• C. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
• D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.

Answer: C

Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html

 

NEW QUESTION 79
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

• A. DRS
• B. HA
• C. VDP
• D. VSS
• E. FT

Answer: A,B

 

NEW QUESTION 80
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

• A. Ethernet and unified ports on the same port channel
• B. cross-connections with pinning
• C. VSS that has unified uplinks
• D. vPC that has unified uplinks

Answer: D

Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11

 

NEW QUESTION 81
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

• A. processor count
• B. GPU support
• C. storage capacity
• D. network speed

Answer: C

 

NEW QUESTION 82
Which technology enables Layer 2 extension between remote data center sites?

• A. DMVPN
• B. OTV
• C. GRE
• D. FCIP

Answer: B

 

NEW QUESTION 83
A network engineer is implementing Cisco UCS Manager with Cisco UCS Central integration. The company's strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS Manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS Manager.
Which two profiles must be used to meet these requirements? (Choose two.)

• A. restricted chassis
• B. local power
• C. public network control
• D. global maintenance
• E. local service

Answer: C,E

 

NEW QUESTION 84
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)

• A. The STP parameter configuration is supported.
• B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
• C. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
• D. STP runs on the server ports.
• E. The STP parameter configuration is unsupported.

Answer: C,E

 

NEW QUESTION 85
Which two automation requirements can be met by using Puppet? (Choose two.)

• A. Enable clients to pull changes without installing an agent.
• B. Enable clients to pull changes to configuration files.
• C. Provide support for writing new modules in Python.
• D. Enable one-off infrastructure changes to be performed manually.
• E. Push configuration updates immediately to servers.

Answer: B,E

 

NEW QUESTION 86
Which two automation requirements can be met by using Puppet? (Choose two.)

• A. Enable clients to pull changes without installing an agent.
• B. Enable clients to pull changes to configuration files.
• C. Provide support for writing new modules in Python.
• D. Enable one-off infrastructure changes to be performed manually.
• E. Push configuration updates immediately to servers.

Answer: B,E

Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf

 

NEW QUESTION 87
Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

• A. Smart Zoning feature on the Cisco UCS Fabric Interconnects
• B. NPV feature on the Cisco MDS Series.
• C. end-host mode feature on the Cisco UCS Fabric Interconnects
• D. NPIV feature on the Cisco MDS Series
• E. SAN Pin Groups on the Cisco UCS Fabric Interconnects.

Answer: B,D

 

NEW QUESTION 88
......

300-610 Certification Exam Dumps Questions in here: https://drive.google.com/open?id=1as8aao-N1Quv8PYYZbKJKVz2IakYW_WO

Pass Your 300-610 Exam Easily with Accurate PDF Questions: https://www.examstorrent.com/300-610-exam-dumps-torrent.html