Steps Necessary To Pass The NCS-Core Exam from Training Expert ExamsTorrent
Valid Way To Pass NCS Professional's NCS-Core Exam
NEW QUESTION 87
Refer to the exhibit.
An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?
- A. Configure the fqdn for the hosts indicated
- B. Check the hardware page for disk failures
- C. Troubleshoot the zookeeper server issue
- D. Re-run NCC specifying data_resiliency_check
Answer: D
NEW QUESTION 88
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receivinga notification email.
- B. User 1 can add an 8GB file to the share without receiving notification.
- C. User 2 can continue to add another 3GB file butwill receive a daily notification email.
- D. User 1 can continue to add another 5GB file but will receive a daily notification email.
Answer: A,D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcep
NEW QUESTION 89
An administrator responsible for a VDI environment needs to investigate reports of slow logins.
Theadministrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times.
Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDI VMs.
What are two impacts on the cluster? (Choose two.)
- A. Increasing CPU counts will decrease memory utilization
- B. Increase memory utilization%
- C. Increase CPU ready%
- D. Increase CPU utilization%
Answer: C,D
NEW QUESTION 90
An administrator recently added in 3 nodes to an existing 5 node cluster. While 1 node came with its own block, theother 2 nodes where added to an existing share. After adding the nodes, the administrator sees that the hardware tab displays the correct number of nodes, but incorrect position in the diagram tab.
What should the administrator do to resolve the issue?
- A. Check the factory_config. json for the two single nodes.
- B. SSH into CVM and perform genesis restart on each CVM
- C. Check the factory_config.json for all 3 nodes
- D. SSH into the CVMs and run genesis acropolis stop; cluster start
Answer: A
NEW QUESTION 91
An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?
- A. Set the SCSI timeout value to 60
- B. Utilize a separate subnet for the Linux VMs
- C. Utilize Jumbo Frames
- D. Add additional disks to the Volume Group
Answer: A
Explanation:
Explanation
Ref:https://kb.vmware.com/s/article/1009465
NEW QUESTION 92
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Configure the static IP address through the desktop virtualization software.
- B. Open terminal and configure via ifconfig command.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 93
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Application Security Policy
- B. A Quarantine Policy
- C. A Whitehst-Based Policy
- D. AnIsolation Environment Policy
Answer: D
Explanation:
NEW QUESTION 94
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Metro Availability
- B. NearSync
- C. Leap
- D. Asyn&DR
Answer: C
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_D
NEW QUESTION 95
A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)
- A. Foundation VM
- B. Foundation Applet
- C. Foundation Central
- D. Foundation Portable
Answer: B,D
NEW QUESTION 96
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. Internal
- B. External
- C. Hard
- D. Soft
Answer: D
Explanation:
NEW QUESTION 97
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)
- A. 192.168.5.254
- B. 192.168.5.253
- C. 192.168.5.2
- D. 192.168.5.1
Answer: A,C
NEW QUESTION 98
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected
5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?
- A. Change the protection domain to use Async DR
- B. Configure the protection domain to take snapshots on15-minute intervals
- C. Fix a connectivity issue because the protection domain reverted to Async
- D. Utilize Metro Availability to meet this requirement
Answer: C
NEW QUESTION 99
The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?
- A. There is a VLAN misconfiguration on the switch.
- B. The vNIC port is disconnected on the affected VMs.
- C. Jumbo Frame are misconfigured across ports.
- D. There is a VLAN misconfigurationon the VMs.
Answer: A
NEW QUESTION 100
A consultant finishes creating a new ESXi cluster. The consultant connects to the nodes via laptop and a personal flat switch. The host/CVM network is on VLAN 23. The customer has the native VLAN on the ToR switches set to 23.
The customer wants to use LACP. Before placing the nodes on the customer network, the consultant tags VLAN 23 for each host and CVM. The consultant connects the nodes to the customer network and finds that they are unreachable.
What is causing this issue?
- A. The hosts have not been migrated to a vSphere Distributed Switch.
- B. Under the vSwitch0 settings, the consultant did not select Route based on IP hash.
- C. The host and CVM are incorrectly configured.
- D. The customer has LACP fallback enabled on switch ports.
Answer: A
NEW QUESTION 101
An organization subscribes to field advisories from the Nutanix support portal. An administrator receives an email about a rare problem that could cause cluster instability and affect the entire AOS cluster. The organization is running Vmware vsphere 6.x on Nutanix.
What action should be taken to resolve this issue?
- A. File a ticket to NutanixSupport and provide the Field Advisory ID.
- B. Open Prism Element and select Upgrade Software to update AOS.
- C. In Prism Central, select Life Cycle Management and perform LCM update.
- D. Use VMware Update Manager to update the cluster.
Answer: C
NEW QUESTION 102
Where in the Support Portal is the Best Practices guide for vSphere Networking located?
- A. Knowledge Base
- B. Product Notices
- C. Software Documentation
- D. Solutions Documentation
Answer: D
NEW QUESTION 103
A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?
- A. If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.
- B. Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.
- C. If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.
- D. Verify that IPv6 Link Local and DHCP is enabled on all switch ports.
Answer: C
NEW QUESTION 104
An administrator deploys Exchange on a Nutanix cluster. The administrator creates two containers with RF2 configuration:
* One container for Exchange
* One container for the other VMs
The Exchange VM isexperiencing I/O performance issues.
Which changes to Storage Optimization should be used on the Exchange container to enhance I/O performance?
- A. Inline compression andDeduplication
- B. Post process Deduplication only
- C. No data reduction
- D. Inline compression and EC-X
Answer: C
NEW QUESTION 105
An administrator needs to maximize storage potential in a six-node cluster. The container is configured with the following:
* Post-process compression
* Capacity deduplication
What should the administrator configure to increase space savings?
- A. Reserve capacity
- B. Cache dedupe
- C. Inline compression
- D. Erasure coding
Answer: D
NEW QUESTION 106
An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?
- A. Click Activate on the Secondary site within the Data Protection Dashboard
- B. Choose Migrate on the Secondary site within the Data Protection Dashboard
- C. Click Activate on the Secondary site and run deactive NCLI command on Primary site
- D. Choose Migrate on the Primary sitewithin the Data Protection Dashboard
Answer: D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:wc-protection-
NEW QUESTION 107
A consultant creates a Windows VM after installing a new Nutanix cluster running AHV. The consultant has statically assigned an IP address to the VM but it is unable to communicate on the network.
Which action should the consultant take to resolve this issue?
- A. Mount and install the Nutanix Guest Tools.
- B. Confirm that the VM vNIC is tied to the correct VLAN in Prism Element.
- C. Confirm that IPv6 is enabled on the guest VM.
- D. Set a Group Policy to make sure the Windows Firewall is disabled.
Answer: B
NEW QUESTION 108
......
All NCS-Core Dumps and Nutanix Certified Services Core Infrastructure Professional Training Courses: https://www.examstorrent.com/NCS-Core-exam-dumps-torrent.html
Free Test Engine For Nutanix Certified Services Core Infrastructure Professional Certification Exams: https://drive.google.com/open?id=1yDbauEzUkmamP-R8rXxhSRDz0ljHAQgf