Free Demo
About Juniper QFabric, Specialist (JNCIS-QF) exam torrent
Everyone wants a certificate quickly; the hard part is preparing wisely. The ExamsTorrent Juniper QFabric, Specialist (JNCIS-QF) materials concentrate on the tested points, so 108 practice questions cover what matters without padding.
Juniper JN0-370 Exam Overview:
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Junos QFabric Specialist (JN0-370) |
| Exam Number: | JN0-370 |
| Available Languages: | English |
| Exam Format: | Multiple Choice, Multiple Response |
| Exam Duration: | 90 minutes |
| Related Certifications: | JNCIA-Junos JNCIS-ENT |
| Recommended Training: | Juniper Learning Portal |
| Exam Registration: | Pearson VUE Juniper Exams Juniper Certification Portal |
| Sample Questions: |  |
| Exam Way: | Pearson VUE proctored exam (online or test center) |
| Pre Condition: | Recommended: JNCIA-Junos certification and basic Junos OS networking knowledge |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/ |
Juniper JN0-370 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Operations and Troubleshooting | - Troubleshooting connectivity and fabric issues - Monitoring QFabric health and performance |
| Maintenance and Software Management | - Backup and recovery procedures - Software upgrades and lifecycle management |
| QFabric Devices and Roles | - Director devices and fabric management - Node devices and interconnect devices |
| QFabric Architecture and Concepts | - QFabric system components and roles - Control, data, and management planes - Architecture overview and design principles |
| Configuration and Provisioning | - Initial setup and system provisioning - Service configuration and logical partitioning |
JN0-370 Exam FAQ: Practical, Current, Expert-Built
Recommended: JNCIA-Junos certification and basic Junos OS networking knowledge Since requirements change over time, confirm the latest on the official Juniper exam page before scheduling.
Three versions of the same study materials: a printable, expert-prepared PDF with free demo download and instant access; a Desktop Test Engine for Windows with customizable simulation and timed modes that works offline; and an Online Test Engine for any browser on Windows, Mac, Android, and iOS with test history and performance review. All 108 practice questions are identical across versions. Every purchase includes 365 days of free updates, a 50% renewal discount afterward, and unlimited computer installations.
The JN0-370 exam is a Juniper certification exam validating the Juniper QFabric, Specialist (JNCIS-QF) syllabus shown above. It belongs to these credential paths: JNCIA-Junos, JNCIS-ENT. Candidates in 2026 start with ExamsTorrent's 108 practice questions, available as a printable PDF, a Windows Desktop Test Engine, and an Online Test Engine — three versions of the same materials.
Juniper recommends these training resources for the Juniper QFabric, Specialist (JNCIS-QF) exam:
Follow the training with steady self-testing — the 108 practice questions from ExamsTorrent help you apply theory and fill any gaps the training leaves.
The official Juniper QFabric, Specialist (JNCIS-QF) outline defines 5 domains. The leading three are Configuration and Provisioning, Maintenance and Software Management, and Operations and Troubleshooting. The full list is in the topics section above, and ExamsTorrent's 108 practice questions cover each one.
The official Juniper page publishes the current question count and duration; review it before your test date.
Scoring and fees are published by Juniper and may change; verify the current figures on the official site.
ExamsTorrent issues a full refund if you take the Juniper QFabric, Specialist (JNCIS-QF) exam within 60 days of purchase and do not pass. The policy does not apply if the exam is taken within 3 days of purchase, if the exam was never actually taken, or to free materials or expired orders, and the candidate name must match the payer name. Submit a scan of your enrollment slip and the official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Alternatively, exchange for two free exam products of equal value and keep your original update service. Orders arrive by email within 1 minute — contact support if nothing arrives within 2 hours.
Pearson VUE proctored exam (online or test center) Register for the Juniper QFabric, Specialist (JNCIS-QF) exam through these official channels:
After booking, ExamsTorrent delivers your practice questions within 1 minute — preparation starts the same day.
Juniper QFabric, Specialist (JNCIS-QF) Sample Questions:
You have just configured a QFabric system as a transit FCoE switch between a server and an FCoE gateway device. The server's converged network adapter state is showing as "Dead".
Which two commands will assist in troubleshooting the issue? (Choose two.)
- A. show dcbx neighbors
- B. show fip snooping
- C. show hba connections
- D. show fibre-channel flogi nport
Correct Answer: A,B 🗳️
A customer mentions that a new Node device connected to a QFabric system is not discovered.
What are three reasons for this issue? (Choose three.)
- A. The VCCP protocol on the Node device is not running.
- B. The control plane cabling is incorrect.
- C. The C0 and C1 ports on the Node device are not assigned correct IP addresses.
- D. The Node device is in standalone mode.
- E. The Node device is not preconfigured in the QFabric system.
Correct Answer: A,B,D 🗳️
You are asked to configure a link aggregation group (LAG) between a QFabric system and an attached MX Series router. This LAG must support Layer 3 communications and must be associated with multiple VLANs.
Which configuration approach should you use?
- A. Configure a Layer 3 LAG with the native-vlan option while ensuring that all desired VLANs are part of the native VLAN.
- B. Configure a Layer 3 LAG with the vlan-tagging option with the required logical units and the parameters needed to support the desired VLANs.
- C. Configure a Layer 2 LAG as a trunk port for the desired VLANs ensuring that the required RVIs are defined and associated with those VLANs.
- D. Configure a Layer 2 LAG with the vlan-tagging and inet options along with the required logical units and parameters needed to support the desired VLANs.
Correct Answer: C 🗳️
You notice that Fibre Channel over Ethernet (FCoE) traffic is dropped in a QFabric system.
What are two reasons why this is happening? (Choose two.)
- A. The FCoE traffic is not classified correctly at the ingress interface.
- B. Priority-based flow control (PFC) is not enabled.
- C. The FCoE traffic is not classified correctly at the egress interface.
- D. Data center bridging exchange (DCBx) is enabled.
Correct Answer: A,B 🗳️
Whenever you connect a Layer 2 switch to the xe-0/0/0 interface of the LC2 Node device in the server Node group of a QFabric system, the interface xe-0/0/0 on LC2 is disabled.
What is causing this problem?
- A. The xe-0/0/0 interface on the LC2 Node device is not configured for family Ethernet switching.
- B. The LC2 Node device is not connected to the QFabric system.
- C. Interfaces on the server Node group can connect only to servers.
- D. The interface xe-0/0/0 of the LC2 Node device detects incoming BPDUs from a Layer 2 switch.
Correct Answer: D 🗳️
Viewing page 1 out of 22 pages.
Viewing questions 1-5 out of 108 questions.
