Verified MB-330 dumps Q&As - 100% Pass from ExamsTorrent

Pass MB-330 Exam in First Attempt Guaranteed 2023 Dumps!

Microsoft MB-330: Job Roles

One of the main reasons why people choose the Microsoft MB-330 exam is because it helps them to move forward in their careers. Once you pass this test and earn the associate-level certification, you will find it much easier to get interview calls. It is a well-known fact that the companies prefer the certified specialists as they are quite skilled. So, if you complete this exam, you can apply for the following job roles: a Supply Chain Associate, a Functional Consultant, and a Solution Architect, among others. All of these positions come with good remuneration.

 

NEW QUESTION # 23
You need to resolve the issue for UserB?
Which options should you use? To answer, select the appropriate options in the area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION # 24
You are the purchasing manager for a company. You enter into a consignment agreement with a vendor.
Raw material R0001 is managed under the consignment agreement with the vendor.
You need to replenish raw material R0001 for consumption and update ownership.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation

NEW QUESTION # 25
A company uses Dynamics 365 Supply Chain Management.
The company classifies and tracks products based on how useful they are for achieving their business goals.
Certain product classifications are important in relation to inventory controls and margins. Other classifications have a small profit margin and are less important for inventory variances.
The classification configuration must feed into existing classification reports and system logic.
You need to configure the products for the classifications.
Where should you configure the classifications?

• A. Unreleased product variant
• B. Product attributes
• C. Released product variant
• D. Released product
• E. Unreleased product

Answer: B

NEW QUESTION # 26
A company sells a new product line. Buyers purchase a large shipment into the distribution center.
The product must be divided among the retail stores equally.
You need to configure buyer push functionality.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 27
A company uses planning optimization in Dynamics 365 Supply Chain Management.
A planning optimization job is triggered by mistake from the user interface. The planning optimization job is running with incorrect runtime filters.
You need to resolve the issue.
What should you do?

• A. Cancel the job from the plan history.
• B. Cancel the planning optimization fit analysis.
• C. Cancel the job from the dialog box.
• D. Disable the environment add-in.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/master-planning/planning-optimization/cancelplanning-job

NEW QUESTION # 28
You need to configure the system to meet the inventory team cost control requirement.
Which processes should you run? To answer, drag the appropriate processes to the correct requirements. Each process may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/inventory-close

NEW QUESTION # 29
You are implementing Dynamics 365 Supply Chain Management for a company that uses bill of materials (BOM) templates to expedite setup in the system.
A line must be removed from the BOM, but the system does not allow this.
You need to determine why you are unable to perform this deletion.
Why are you unable to delete the line?

• A. The local version of the BOM template has been associated to a service object.
• B. The BOM template has been associated to a service object.
• C. The BOM template version has already been saved.
• D. The local version of the BOM template has been modified.

Answer: B

Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/service-management/template-boms

NEW QUESTION # 30
A company creates loads to ship sales orders.
Loads must be shipped by using the lowest freight rates possible.
You need to use the load planning workbench to create a load for sales order shipments.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 31
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company has an agreement to pay royalties to a third party for use of their logo.
A royalty contract must be setup so that the third party paid monthly. The payment is based on invoiced sales.
You need to create a royalty contract and create monthly Accounts payable to the third party.
Solution: Create a royalty contract. Select monthly for the cumulative sales. Add line item, products, and value to pay the vendor for use of the logo.
Doss the solution meet the goal?

• A. No
• B. Yes

Answer: B

Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/royalty-contract

NEW QUESTION # 32
An airport uses Dynamics 365 for Finance and Operations. You purchase new baggage-sorting hardware.
You must add both the hardware and the service contract for the hardware to the product hierarchy.
You need to configure the category node.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION # 33
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage inventory.
Backorders exist on customer sales orders because incorrect data was given on product quantities.
Users need to look up what quantity can be sold and when more product will arrive.
Solution: Total Available shows what is available for sale at that point in time.
Does the solution meet the goal?

• A. No
• B. Yes

Answer: A

Explanation:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/inventory/inventory-on-hand-list

NEW QUESTION # 34
A company implements warehouse locations in Dynamics 365 Supply Chain Management.
You need to configure location directives for inventory movement.
Which configurations should you use? To answer, drag the appropriate strategies to the correct requirements. Each strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 35
An employee at a company needs to lay out the various component builds for bicycles.
You need to identify which constraints the employee should use to set up the bicycles.
Which two types of constraints achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. expression constraints that are unique to each product configuration model
• B. table constraints that are used generically among product configuration models
• C. table constraints that are always unique to each product configuration model
• D. expression constraints that are used generically among product configuration models

Answer: A,B

NEW QUESTION # 36
An inventory control clerk manages adjustments in inventory.
Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory.
You need to configure the system.
Which journal types should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 37
You are the purchasing manager for a company. You enter into a consignment agreement with a vendor.
Raw material R0001 is managed under the consignment agreement with the vendor.
You need to replenish raw material R0001 for consumption and update ownership.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

1 - Create a consignment replenishment order
2 - Transfer material from the vendor warehouse to your company warehouse
3 - Generate a consignment replenishment order product receipt
4 - Create and post an inventory ownership change journal entry

NEW QUESTION # 38
A company wants to expand their purchasing power by enhancing their current procurement catalog in Dynamics 365 for Finance and Operations.
The company wants to redirect to external websites to help build their purchase requisitions.
You need to set up an external catalog.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation

NEW QUESTION # 39
DRAG DROP
A company uses the Dynamics 365 for Finance and Operations Warehouse management module.
The company requires production waves to be processed in batch.
You need to configure wave processing.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION # 40
A company uses Dynamics 365 Supply Chain Management.
The finance department processes royalty claims using the accounts payable module.
You need to pass the claims to the accounts payable group for payment.
Which three events will occur? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. A hold is put on the amounts held in the royalty fees account
• B. A new vendor invoice for the royalty is created and posted.
• C. A vendor invoice for the royalty payment is set to draft.
• D. A Royalty accrual journal posting reverses the previous interim postings for accrual and expense amounts.
• E. A credit is posted to the vendor's payable account.

Answer: B,D,E

Explanation:
References:
https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/royalty-contract

NEW QUESTION # 41
......

Microsoft Dynamics 365 Supply Chain Management is a comprehensive solution that enables organizations to streamline their supply chain operations and improve efficiency. The MB-330 exam is designed to assess a candidate's ability to leverage the functionality and capabilities of Dynamics 365 Supply Chain Management to achieve business objectives. Successful completion of the exam demonstrates that the candidate has the knowledge and skills necessary to implement and configure Dynamics 365 Supply Chain Management solutions that meet the needs of their organization.

 

MB-330 Dumps Full Questions - Exam Study Guide: https://www.examstorrent.com/MB-330-exam-dumps-torrent.html

Use Real MB-330 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=10V7vznCh_AqML1WW0_BnSZIDSrK2qmuR