Ultimate Guide to Prepare 1z0-1035-20 Certification Exam for Intelligent Advisor in 2021

Use Real 1z0-1035-20 Dumps - Oracle Correct Answers updated on 2021

NEW QUESTION 30
You just developed a policy model and need to test a discrete portion of the rules without using screens.
Identify the correct process.

• A. Go to Build > Test Data Model and enter the discrete portion of the rules that you want to test and assign values.
• B. Go to Test > Discrete data Sets > and set the entity and attribute values that you want to test in the Rule Testing window.
• C. Go to Debug > Data > and set the entity and attribute values that you want to test in the Oracle Policy Modeling Debugger window.
• D. Go to Build > Build and Debug and select Build and Debug without screens in the Oracle Policy Modeling Testing window.

Answer: B

 

NEW QUESTION 31

Assuming that no relationship text has been manually defined or changed, what type of relationship is "all instances of the store"?

• A. a reference relationship with Global as the target entity
• B. a containment relationship with the store as the target entity
• C. a containment relationship with the employee as the target entity
• D. a reference relationship with the store as the target entity
• E. a containment relationship with Global as the target entity
• F. a self-referential relationship with the store as both the source and target entity

Answer: E

 

NEW QUESTION 32
Which five statements are valid ways of writing a rule condition using a comparison?

• A. The number of pictures in the gallery > 10000
• B. The date the store opened = 03/03/2016
• C. The ticket price = $15
• D. The person's date of birth < the spouse's date of birth
• E. The customer's membership level = Gold
• F. 10 < = the cost of the item
• G. The customer's age > 18

Answer: A,D,E,F,G

 

NEW QUESTION 33
Which three actions will help avoid or identify a multiply proven attribute error?

• A. Use the "Go To" option in Word to see if the attribute is proven in another rule.
• B. Right-click the attribute on the Project tab to see if the attribute is used in multiple forms.
• C. Right-click the attribute on the Data tab to see if the attribute is proven in another rule.
• D. Check the error list on the Rules tab for multiply proven attribute errors.
• E. Double-click the attribute on the Interview tab to see if the attribute is used on multiple screens.

Answer: B,C,D

 

NEW QUESTION 34
Which three statements are correct about explanations and audit reports?

• A. Explanations are automatically saved to a data source when one is available.
• B. Explanations can be saved, audit reports cannot.
• C. Explanations can be shown in a Form, audit reports cannot.
• D. Explanations can be shown on an interview screen, audit reports cannot.
• E. Audit reports are automatically saved to a data source when one is available.
• F. Explanations can only be added to the final screen in an interview.
• G. Silent and Invisible tags control the information that is shown in an explanation, not in an audit report.

Answer: C,F,G

 

NEW QUESTION 35
You are about to begin a Policy Automation project.
Which two aspects of this project are reasons to use Collaboration?

• A. Communications with the client and policy experts will be frequent.
• B. The policy model will handle large amounts of data after it is deployed into production.
• C. The project will require sharing rules across multiple policy models.
• D. More than one policy modeler will be working simultaneously on the project.
• E. The project will involve highly complex source policy that is sometimes subject to interpretation.

Answer: B,C

 

NEW QUESTION 36
Which two operators must you use in a procedural rule to enforce collection of all entity-level data for all entity instances?

• A. Known
• B. ExistsScope
• C. For
• D. ForAll
• E. InstanceCount
• F. Exists

Answer: A,F

 

NEW QUESTION 37
Which three statements about checkpoints are correct?

• A. Checkpoints can be configured for Service Cloud connections, but not for other web service connections.
• B. A data connection is required to configure checkpoints for an interview.
• C. Interviews can have checkpoints after every screen.
• D. Checkpoints can be configured for web interviews, but not Policy Automation Mobile interviews.
• E. Interviews can have checkpoints after hosen screens.
• F. Interviews must have at least one checkpoint.

Answer: A,B,F

 

NEW QUESTION 38
Which two statements about connectors and grouping operators are correct?

• A. AND and OR connectors must always be on separate lines to the attributes they are connecting.
• B. Grouping operators reduce ambiguity in rules.
• C. The grouping operator sits at the same level as the conditions it is grouping.
• D. The ALL grouping operator sits at the same level as the conditions it is grouping.
• E. A rule may contain AND and OR connectors.

Answer: A,E

 

NEW QUESTION 39
Which three options will result in an error due to incorrect use of grouping operators?

• A. Option A
• B. Option D
• C. Option C
• D. Option B
• E. Option F
• F. Option E

Answer: A,C,E

 

NEW QUESTION 40
You wrote rules represented conceptually by the following rule diagram:

You build and run your entire set of rules in the Debugger.
Which two methods can you use to test only the subset of five rules represented by the five black lines connecting the attributes shown as orange circles?

• A. Set values for the lowermost orange circle attributes via the data tab and then view the decision report for the uppermost green square attribute.
• B. Investigate the uppermost orange circle attribute via the data tab and then set values for the base shown in the decision tab.
• C. Set values for the lowermost orange circle attributes via the data tab and then view the decision report for the uppermost orange circle attribute.
• D. Set values for the lowermost blue triangle attributes via the data tab and then view the decision report for the uppermost green square attribute.
• E. Investigate the uppermost green square attribute via the data tab and then set values for the lowermost orange circle attributes in the decision tab.
• F. Investigate the uppermost orange circle attribute via the data tab and then set values for the lowermost orange circle attributes via the decision tab.
• G. Set values for the lowermost blue triangle attributes via the data tab and then view the decision report for the uppermost orange circle attribute.

Answer: C,F

 

NEW QUESTION 41

You have removed an entity instance in the Debugger using the Delete instance option shown. You also want to delete the single entity instance belonging to the relationship "the brands" using the same method.
Why can't you do this?

• A. The entity instance is inferred, and can only be deleted using the Decision tab in the Debugger.
• B. The entity instance can only be removed using the Interview tab in the Debugger.
• C. At least one entity instance of the relationship "the brands" must be retained.
• D. The entity instance is inferred, and can only be deleted by modifying the rules or attribute values which caused it to be created.

Answer: D

 

NEW QUESTION 42
When building test cases in Policy Modeling, when should you add a "Keep" column?

• A. saving a test case
• B. saving an input value
• C. preventing values in the Actual column from being replaced
• D. comparing results from a baseline version of the policy model against a newer version
• E. saving test data to a separate spreadsheet

Answer: C

 

NEW QUESTION 43
When creating your rules, you have used the attribute "the gun fired accidentally". When adding this input to a screen, you notice that the question form of this attribute is "Is the gun fired accidentally true?".
In which way should you resolve this issue to ensure that the word "true" is not included in any text shown to the interview user (including explanations)?

• A. Add the verb "to fire" and change the attribute sentence forms in the Edit Attribute dialog box.
• B. Add the verb "to fire".
• C. Change the question text on the screen.
• D. Remove the word 'accidentally" from the attribute text.
• E. Create a custom attribute text in the Edit Attribute dialog box.

Answer: E

 

NEW QUESTION 44
You have a Policy Modeling project with five attributes as shown below.
* they are at least 100 feet away from the nearest intersection
* the persons aren't coming to the meeting
* the weight of the box in kilograms
* the combined weight of the box and pallet must not exceed 200 kilograms
* there is no ways forward
Which one of these attributes compiles with the principles for writing attribute text?

• A. 0
• B. 1
• C. none
• D. 2
• E. 3
• F. 4

Answer: C

 

NEW QUESTION 45
......

Intelligent Advisor -1z0-1035-20 Exam-Practice-Dumps: https://www.examstorrent.com/1z0-1035-20-exam-dumps-torrent.html