[Jan 19, 2024] Fully Updated Dumps PDF - Latest S1000-007 Exam Questions and Answers

100% Free S1000-007 Exam Dumps to Pass Exam Easily from ExamsTorrent

NEW QUESTION # 27
An administrator is tasked with installing an open source package. They are told to use the IBM AIX Toolbox for Linux Applications because the organization wants to be able to open tickets with IBM support.
What should the administrator tell the requester?

• A. IBM offers extended support for open source software that is licensed with the hardware.
• B. IBM offers extended support for open source software and they need to verify entitlement.
• C. IBM offers standard support for open source software that is licensed with the operating system.
• D. IBM offers this open source software as-is.

Answer: B

NEW QUESTION # 28
An administrator has a test server (my host) that uses local name resolution. The administrator arrives late one morning and finds that their co-worker was asked to make some changes to the IP address of the server.
The co-worker used SMIT from the console, but then when testing from the console, the following command fails:
ping my_host
Why did the ping fail?

• A. They didn't update /etc/hosts after mktcpip was run.
• B. They didn't reboot the server.
• C. They used an incorrect gateway address.
• D. They didn't update the DNS entry.

Answer: A

Explanation:
The /etc/hosts file is used by the system for local name resolution on the server, so if the IP address of the server has been changed, but the /etc/hosts entry has not been updated, the ping command will fail. This is explained in the IBM AIX v7 Administrator Specialty Study Guide, under the topic "Using the mktcpip Command".

NEW QUESTION # 29
Which AIX command displays the types, counts, and percentages of LPAR memory?

• A. mpstat -w 1
• B. Ivmo -a -v rootvg
• C. vmstat -v
• D. iostat

Answer: C

Explanation:
The vmstat command is used to display the types, counts, and percentages of LPAR memory. The -v flag is used to display the virtual memory statistics, including the types and counts of memory. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 6-17).

NEW QUESTION # 30
While executing the following extendvg command, the system administrator receives the following error:

The administrator used the chvg -t command to fix the error.
What is the implication of running this command?

• A. It reduces the maximum number of logical volumes allowed within that volume group.
• B. It reduces the maximum file size allowed within that volume group.
• C. It reduces the maximum number of physical volumes allowed within that volume group.
• D. It reduces the maximum number of files allowed within that volume group.

Answer: B

NEW QUESTION # 31
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf

The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?

• A. On DB_Server run command startsrc -t ftp.
• B. On DBServer run the command /usr/sbin/f tpd.
• C. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
• D. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
• E. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".

Answer: E

NEW QUESTION # 32
A client is running multiple AIX, IBM i and Linux partitions on an IBM Power E980 system. Which command allows the administrator to check the number of processors, amount of memory, and list the devices on the AIX partition?

• A. prtconf
• B. syssnap -gc
• C. lsdev
• D. Iparstat -i

Answer: B

NEW QUESTION # 33
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?

• A. vtmenu
• B. mkvterm
• C. lsrefcode
• D. lssyscfg

Answer: B

NEW QUESTION # 34
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?

• A. mJcvdev
• B. mkrep
• C. oem_setup_env
• D. mlcvterm

Answer: D

NEW QUESTION # 35
An IT security department would like to limit root user access to only members of the group called system. Which command will accomplish this?

• A. cruiser sugroups=system root
• B. chgroup admin=root system
• C. chadmin group=system root
• D. chadmin user=root system

Answer: C

Explanation:
The "chadmin" command can be used to modify the attributes of a user account, including the groups that the user belongs to. The syntax for limiting root user access to members of the group called "system" would be:
sql
chadmin group=system root
This command will add the root user to the "system" group and remove it from any other groups. Members of the "system" group will be the only ones able to access the root account.

NEW QUESTION # 36
What AIX feature will allow data to be mirrored to a remote site?

• A. Geographic Logical Volume Manager
• B. Remote Volume Groups
• C. Asynchronous Dispersed Logical Volumes
• D. Mirror Pools

Answer: A

NEW QUESTION # 37
The lspv and Iquerypv commands show a different PVID for an hdisk. How is this possible?

• A. lspv is incorrectly hashing the UDID of the disk.
• B. lspv is querying a disk at a different location.
• C. lspv shows the contents of the ODM.
• D. The system has the wrong version of the lspv command installed.

Answer: D

NEW QUESTION # 38
The lspv and Iquerypv commands show a different PVID for an hdisk. How is this possible?

• A. lspv is incorrectly hashing the UDID of the disk.
• B. lspv is querying a disk at a different location.
• C. lspv shows the contents of the ODM.
• D. The system has the wrong version of the lspv command installed.

Answer: C

Explanation:
The lspv command displays information about physical volumes on the system, and it retrieves the information from the Object Data Manager (ODM). The ODM is the database that stores information about the system's hardware configuration, including the PVID of each disk. The Iquerypv command directly queries the disk for its PVID, and is therefore able to display the correct PVID. Reference: IBM AIX v7 Administrator Specialty Study Guide, page 546.

NEW QUESTION # 39
While trying to extend a file system named /work an administrator receives the following error. 0516-787 extendlv: Maximum allocation for logical volume fslv00 is 256.
What must be done to allow the file system to be extended?

• A. Change the logical volume type to jfs2 as JFS logical volumes cannot extend past 256.
• B. Change the file system's maximum capacity.
• C. Increase the setting for maximum number of logical partitions for that logical volume.
• D. Increase the volume group's maximum limit of logical partitions per logical volume.

Answer: C

Explanation:
This error indicates that the maximum number of logical partitions for the logical volume is set to 256 and needs to be increased in order to allow the file system to be extended. From the IBM AIX v7 Administrator Specialty Study Guide: "The 0516-787 error indicates that the maximum number of logical partitions for the logical volume is set to 256, and needs to be increased in order to allow the file system to be extended."

NEW QUESTION # 40
What command is used to monitor SAN I/O performance/throughput?

• A. mpstat -w 1
• B. vmstat -i 1
• C. iostat -DIRT 60 10
• D. ioo -L

Answer: C

NEW QUESTION # 41
While executing the following extendvg command, the system administrator receives the following error:

The administrator used the chvg -t command to fix the error.
What is the implication of running this command?

• A. It reduces the maximum number of logical volumes allowed within that volume group.
• B. It reduces the maximum file size allowed within that volume group.
• C. It reduces the maximum number of physical volumes allowed within that volume group.
• D. It reduces the maximum number of files allowed within that volume group.

Answer: C

Explanation:
The chvg command with the -t option is used to reduce the maximum number of physical volumes (PVs) allowed in a volume group (VG). This is necessary when the number of PVs in a VG exceeds the maximum allowed. Reference: IBM AIX v7 Administration Specialty Study Guide (section 10.3.3, pp. 641-642).

NEW QUESTION # 42
Which statement is true regarding the snap command?

• A. By default, it will check there is enough space where the data is to be stored.
• B. It collects performance related data.
• C. The data must be stored in /tmp.
• D. All options are enabled by default.

Answer: A

Explanation:
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.

NEW QUESTION # 43
An administrator wants to check which system tunables have been changed in the system since last boot. Which procedure provides the information needed?

• A. Run tunsave -f ./currentconfig; more ./currentconfig.
• B. Run the no, ioo and scftedo commands with the -cf flag.
• C. Run lstuncfg -1 I grep -v DEFAULT.
• D. View the /etc/tunables/currentconfig file and search for change marks in the file.

Answer: C

Explanation:
The procedure to check which system tunables have been changed in the system since last boot is to run the 'lstuncfg -1 | grep -v DEFAULT' command. The lstuncfg command is used to display the current configuration of the system tunables. By using the '-1' option, the command will display the system tunables and whether they have been changed since the last system reboot. The 'grep -v DEFAULT' command will filter out the default values, allowing you to see only the tunables that have been changed. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/lstuncfg.htm.

NEW QUESTION # 44
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?

• A. mkps
• B. mklv
• C. chps
• D. swapon

Answer: A

Explanation:
The mkps command creates a paging space and activates it when the system is rebooted. This is explained in the IBM AIX v7 Administrator Specialty Study Guide, under the topic "Creating and Activating a Paging Space".

NEW QUESTION # 45
......

Free S1000-007 Exam Questions S1000-007 Actual Free Exam Questions: https://www.examstorrent.com/S1000-007-exam-dumps-torrent.html

Verified S1000-007 dumps and 48 unique questions: https://drive.google.com/open?id=1Kgwp0BAXcjL4IDurQxSCxtBCRxF7vbHd