156-816.61 Exam Dumps - PDF Questions and Testing Engine

156-816.61 Dumps - The Sure Way To Pass Exam

NEW QUESTION 42
When configuring _________, the interface leading to the External Virtual Router should be set as the main IP Address and should be publicly routable.

• A. Virtual Systems in Bridge mode
• B. Anti-spoofing
• C. VLAN Trunking Interfaces
• D. A Virtual Switch
• E. Network Address Translation

Answer: E

 

NEW QUESTION 43
Which of the following VSX components maintain Layer 3 Connectivity?

• A. Internal Virtual Switch
• B. VLAN Interface
• C. External Virtual Switch
• D. Virtual Router
• E. Virtual System in Bridge Moe

Answer: D

 

NEW QUESTION 44
In a VLAN Tag added to a frame header, the __________ is a 2 byte number that identifies a frame as tagged.

• A. User_priority
• B. VLAN identifier
• C. Tag Control information
• D. Tag Protocol Identifier
• E. Canonical Format Indicator

Answer: D

 

NEW QUESTION 45
You need to provide a security layer for an existing core network. You need an inspection module that operates at layer 2, is completely transparent and does not impact the existing IP structure or different control protocols in use. Which of the following virtual devise will perform the kind of inspection you need?

• A. Internal Virtual Router
• B. Virtual System in Bridge Mode
• C. External Virtual Router
• D. Virtual Switch
• E. Virtual System

Answer: B

 

NEW QUESTION 46
Which interface of the Management Virtual System (MVS) can be compared to the External interface of a traditional Security Gateway?

• A. Dedicated management interface, typically eth0
• B. Virtual interface leading from the MVS to the External Virtual Router
• C. Warp interface leading from the MVS to the External Virtual Router
• D. Synchronization interface
• E. None; the External Virtual Router acts as the External interface to all Virtual Systems configured on the VSX Gateway

Answer: C

 

NEW QUESTION 47
If you want your customer's virtual systems to give protected hosts access to and from the internet, which of the following must be configured as a Public IP address?

• A. Default Gateway IP Address of the Virtual Switch
• B. Main IP of the Virtual Switch
• C. Default Gateway IP Address of the Management Virtual System
• D. Main IP of the Management Virtual System
• E. Main IP of the Customer's Virtual System

Answer: E

 

NEW QUESTION 48
At installation, the __________ is bound to all configured physical interfaces of a VSX Gateway, UNLESS the interfaces are specifically assigned to another component.

• A. Internal Virtual Router
• B. VSX Management Server
• C. Synchronization Network
• D. External Virtual Router
• E. Management Virtual System

Answer: E

 

NEW QUESTION 49
Which of the following statements is true concerning the default Security Policy of the External Virtual Router?

• A. The External Virtual Router always enforces the same policy as the Management Virtual System
• B. The default policy of the External Virtual Router Denies all traffic going to or coming from it
• C. The External Virtual Router automatically performs Hide NAT behind external interface for all Virtual Systems connected to it
• D. All traffic coming from networks protected by a VSX Gateway is accepted. All other traffic is dropped
• E. The default policy of the External Virtual Router can't be changed

Answer: B

 

NEW QUESTION 50
TRUE or FALSE. A Virtual System in Bridge Mode can enforce anti-spoofing definitions.

• A. True, as long as the Virtual System has more than two interfaces defined
• B. True, anti-spoofing must be manually defined in bridge mode
• C. True, anti-spoofing measures are defined automatically is Bridge mode
• D. False, anti-spoofing can't be configured for Virtual systems in Bridge Mode
• E. True, as long as Network Address Translation is performed

Answer: B

 

NEW QUESTION 51
Which of the following elements is NOT maintained separately by each Virtual System on a VSX Gateway?

• A. State tables
• B. Configuration parameters
• C. Logging parameters
• D. Security Policies
• E. Management database

Answer: E

 

NEW QUESTION 52
A VSX cluster configuration is built from which three components?

• A. Synchronization Network, Internal Communications Network, Virtual IP Addresses
• B. Management Network, Internal Virtual Network, Virtual IP Addresses
• C. Management Network, Internal Communications Network, Virtual IP Addresses
• D. Synchronization Network, Virtual Network, External Network
• E. Synchronization Network, Internal Network, External Network

Answer: A

 

NEW QUESTION 53
A __________________ is a virtual security device configured on a VSX Gateway, which operates as a complete routing and security domain, with firewall and VPN capabilities.

• A. Virtual System Extension
• B. Virtual System
• C. Context identification Module
• D. External Virtual Router
• E. Virtual Switch

Answer: B

 

NEW QUESTION 54
When configuration a new Virtual System for your VSX Gateway configuration, what should you do first?

• A. Open the Admin CMA SmartDashboard and create a new Virtual System Object
• B. Add a new Virtual System to the Main Customer, so that the Admin CMA can be used as the Management Server
• C. Create a new customer and CMA, to be used as the Virtual System's Management Server
• D. Open the Admin CMA SmartDashboard and create a new CMA object to be used as the Virtual System's Management Server
• E. Open the Global SmartDashboard and create a new Virtual System Object

Answer: C

 

NEW QUESTION 55
Which of the following VLAN membership types is considered explicit in its propogation?

• A. Session-based
• B. Application-based
• C. MAC address-based
• D. Protocol-based

Answer: D

 

NEW QUESTION 56
Communication within a VLAN takes place at which layer of the OSI Model IP stack?

• A. Session Layer
• B. Transport Layer
• C. Physical Layer
• D. Data-link Layer
• E. Network Layer

Answer: D

 

NEW QUESTION 57
Which of the following is NOT a type of physical interface seen in a VSX Gateway?

• A. Warp
• B. Internal
• C. Synchronization
• D. External
• E. Dedicated management

Answer: A

 

NEW QUESTION 58
What is the netmask for each configured Warp Link?

• A. 255.255.255.255
• B. 255.255.0.0
• C. 0.0.0.0
• D. 255.255.255.0
• E. Same as the netmask of the default route of the External Virtual Router

Answer: A

 

NEW QUESTION 59
Which of the following VSX Gateway components are unique to and NOT shared by each Virtual System?

• A. VSX Policy Editor
• B. Context Identification Module
• C. VSX Management Server
• D. VSX Inspection Module
• E. Virtual Router

Answer: D

 

NEW QUESTION 60
VSX clusters are defined at two levels:

• A. VSX cluster and virtual device
• B. VSX Gateway and Virtual device
• C. VSX cluster and physical device
• D. VSX Gateway and physical device
• E. VSX cluster and VSX Gateway

Answer: B

 

NEW QUESTION 61
Which of the following objects allows you to configure resource settings, to limit the number of concurrent connections?

• A. VSX Gateway
• B. Internal Virtual Router
• C. Virtual Systems
• D. External Virtual Router
• E. Virtual Switch

Answer: C

 

NEW QUESTION 62
Which of the following is the only interface configured by running sysconfig, during the installation of a VSX Gateway in a single Gateway environment?

• A. Dedicated Customer interface
• B. Management Interface
• C. Synchronization interface
• D. External Interface
• E. Internal Virtual Route Interface

Answer: B

 

NEW QUESTION 63
Security Policies enforced by Virtual Systems are applied to ___________ connected to the Virtual IP Stack.

• A. Physical Interfaces
• B. All Interfaces
• C. Warp and Virtual Interfaces
• D. Virtual Interfaces
• E. Warp Interfaces

Answer: B

 

NEW QUESTION 64
If a VSX Gateway is protecting multiple customer networks behind only one shared interface, the VSX Administrator must either configure _____________ for source-based routing or deploy a VLAN solution.

• A. Non-VLAN Interface Trunking
• B. VSX Gateway Load Sharing
• C. An Internal Virtual Router
• D. Multiple External Virtual Routers
• E. VSX Gateway High Availability

Answer: C

 

NEW QUESTION 65
The _____________ interface is configured in a VLAN environment, to allow multiple Virtual Systems to share a single physical interface on a VSX Gateway.

• A. Physical
• B. Synchronization
• C. Symbolic
• D. Virtual
• E. Warp

Answer: D

 

NEW QUESTION 66
A Virtual System in Bridge Mode is a Virtual System that implements:

• A. VLAN Tagging
• B. Dynamic IP Routing
• C. Network Address Translation
• D. IP Routing
• E. Native Layer-2 Communications

Answer: E

 

NEW QUESTION 67
......

Pass CheckPoint 156-816.61 Exam Quickly With ExamsTorrent: https://www.examstorrent.com/156-816.61-exam-dumps-torrent.html