100% Free Real Updated NSE6_FWF-6.4 Questions & Answers Pass Your Exam Easily
Easily To Pass New NSE6_FWF-6.4 Verified & Correct Answers
Fortinet NSE6_FWF-6.4 certification is a valuable asset for professionals who are looking to advance their careers in the field of network security. It demonstrates to employers that an individual has the skills and knowledge to design and implement secure wireless LAN solutions, which is becoming increasingly important in today’s digital landscape. Earning this certification can help individuals to stand out in a competitive job market and can open up new opportunities for career advancement.
NEW QUESTION # 18
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured for captive portal authentication
- C. A VAP configured to authenticate using a radius server
- D. A VAP configured to authenticate locally on FortiGate
Answer: A,C
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION # 19
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Configure the controller for the correct country code for Germany
- C. Clone a suitable FortiAP profile and change the county code settings on the profile
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
Answer: C
NEW QUESTION # 20
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: A
NEW QUESTION # 21
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. The wireless network interface must be assigned a Layer 3 address
- C. The wireless network to Internet firewall policy must be configured
- D. Security Fabric and HTTPS must be enabled on the wireless network interface
Answer: C
Explanation:
Explanation
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION # 22
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create a custom AP profile
- B. Create wireless LAN specific policies
- C. Preauthorize APs
- D. Set the wireless controller country setting
Answer: D
NEW QUESTION # 23
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Broadcast
- C. DHCP
- D. Multicast
Answer: C
NEW QUESTION # 24
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Broadcast
- B. DHCP
- C. Multicast
- D. Static
Answer: D
Explanation:
Explanation
According to the web search results, the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration is static. This means that the FortiAP sends discovery requests to a preconfigured IP address that the controller owns. This is useful if the FortiAP and the controller are not in the same subnet and other discovery methods will not work. The other discovery methods are used in sequence if the static method fails or is not configured. References: Advanced WiFi controller discovery | FortiAP / FortiWiFi 7.4.0
NEW QUESTION # 25
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 Enterprise wireless network
- B. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- C. An X.509 certificate to authenticate the client
- D. An X.509 to authenticate the authentication server
- E. A WPA2 or WPA3 personal wireless network
Answer: C,D
NEW QUESTION # 26
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
Answer: B,D
Explanation:
Explanation
According to the web search results, Auto TX Power control is a feature that allows the AP to automatically adjust its transmission power based on the RF environment. The goal is to minimize interference and optimize coverage cells for roaming. When the AP detects any other wireless signal stronger than -70 dBm, it means that there is a potential source of interference nearby, so it will reduce its transmission power until it reaches the minimum configured TX power limit. This will reduce the interference and improve coexistence with other devices. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it means that there is a high density of APs in the area, so it will also reduce its transmission power until it reaches the minimum configured TX power limit. This will balance the load and avoid overlapping coverage areas.
References: AP Transmit Power and Enable Power Reduction with Auto TX, Transmit Power and Antenna Configuration, Meraki Auto RF: Wi-Fi Channel and Power Management
NEW QUESTION # 27
Which statement is correct about security profiles on FortiAP devices?
- A. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.
- B. Security profiles can only be applied via firewall policies on the FortiGate.
- C. Security profiles are only supported on Bridge-mode SSIDs.
- D. Security profiles can only be applied to unencrypted wireless traffic.
Answer: A
Explanation:
Explanation
Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. References: Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.
NEW QUESTION # 28
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Personal and radius MAC filtering
- B. Open, with radius MAC filtering
- C. WPA2 Enterprise
- D. WPA3 Enterprise
Answer: A
NEW QUESTION # 29
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. FortLink channels
- B. Security channels
- C. Data channels
- D. Control channels
Answer: C,D
Explanation:
Explanation
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION # 30
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Increase the transmission power of the AP radio interfaces
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Disable intra-vap-privacy for the Authors vap-wireless network
- D. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
Answer: B,C
NEW QUESTION # 31
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 81 Tunnel-Private-Group-ID
- C. 64 Tunnel-Type
- D. 58 Egress-VLAN-Name
- E. 65 Tunnel-Medium-Type
Answer: B,C,E
Explanation:
Explanation
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 32
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP measurements can be scheduled to occur at specific times.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
Answer: B,D
Explanation:
According to Fortinet training: "When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC" and "To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn't do continuous spectrum analysis..."
NEW QUESTION # 33
......
Fortinet NSE6_FWF-6.4 exam is a comprehensive test that covers a range of topics related to secure wireless LAN. NSE6_FWF-6.4 exam is designed to test the candidate's knowledge in areas such as wireless security, access control, authentication, and encryption. NSE6_FWF-6.4 exam consists of multiple-choice questions and requires the candidate to demonstrate their ability to apply their knowledge to real-world scenarios.
Free NSE6_FWF-6.4 Exam Files Downloaded Instantly: https://www.examstorrent.com/NSE6_FWF-6.4-exam-dumps-torrent.html
Verified & Latest NSE6_FWF-6.4 Dump Q&As with Correct Answers: https://drive.google.com/open?id=1AqE7EGIRD4gpOP2yIIjLETvOSSAMdTEz